How to Install Garage Door Springs: A Step-by-Step Guide

Did you know that garage doors are an essential component of every home? They keep your cars and other things safe and improve the look of your home as a whole. But, like any other mechanical device, garage doors need to be maintained and fixed on a regular basis to work well. Broken or worn-out springs are one of the most common things that go wrong with garage doors. Here you can find out how to install garage door springs and why it’s better to hire a service like DoorFlex to do the job for you rather than doing it yourself.

Before we start, it’s important to note that installing garage door springs can be dangerous if you don’t have the right tools, information, and experience. The springs have a lot of tension on them, and if they are not handled correctly, they can cause serious injury. We recommend that you hire a professional garage door repair service like DoorFlex to install or fix your garage door springs. But if you’re an experienced DIYer and sure of your skills, here’s how to put garage door springs in yourself:

Step 1: Gather Your Tools and Materials

To install garage door springs, you’ll need the following tools and materials:

• New garage door springs (make sure they match the old ones in terms of size and weight capacity)
• Safety glasses and gloves
• Winding bars
• Vice grips
• Adjustable wrench
• Ladder
• Socket wrench set
• Tape measure

Step 2: Disconnect the Garage Door Opener

The garage door opener needs to be turned off before the springs can be put in. This will keep the door from opening or closing on its own while you work on it. Pull the emergency release cord that hangs from the opener rail to disconnect the opener.

Step 3: Release the Tension on the Old Springs

Before you can take the old springs off, you’ll need to release the tension on them. To do this, put the winding bars into each end of the spring’s winding cone. Turn the cone counterclockwise with the bars until the spring comes loose. Once the tension is removed, use the vice grips to hold the bars in place and keep the cone from turning.

Step 4: Take the Old Springs Off

Now that the tension has been removed, the old springs can be taken out. Use the adjustable wrench to remove the screws that hold the springs in place on the end brackets. Once the screws are loose, slide the springs off the brackets and take them off the door.

Step 5: Install the New Springs

Before you install the new springs, make sure they are the right size and can hold the right amount of weight for your door. Then, put the springs on the end brackets and use the adjustable wrench to tighten the set screws. Next, use the winding bars to turn the springs in a clockwise direction until they have the right amount of tension. Here, it’s important to have the right knowledge and experience, because winding the springs to the wrong tension can cause serious injury.

Step 6: Test the Door

It is time to test the door after the new springs have been put in and properly tensioned. Reconnect the garage door opener and try to open and close the door to make sure it works well. If the door is too heavy or does not open all the way, for example, you may need to change the tension on the springs.

Even though you can install garage door springs on your own, we recommend that you hire a professional service like DoorFlex to do it. This is why:

• Safety: As we said before, garage door springs are under a lot of tension and can be dangerous if they are not handled properly. Professional services like DoorFlex have the tools, knowledge, and experience to do the job safely and well, reducing the chance that someone will get hurt or your property will get damaged.
• Installing garage door springs yourself can be hard and take a lot of time, especially if you do not know what you’re doing. Hiring a professional can save you both time and trouble. Hiring a professional service will save you time and trouble and get the job done quickly and well.
• Warranty and Guarantee: Professional garage door services like DoorFlex offer warranties and guarantees on their work. This gives you peace of mind and ensures that any problems will be fixed quickly and to your satisfaction.

If you’re not sure of your skills or do not have the right tools and experience, we recommend hiring a professional service like DoorFlex to do the job. With their knowledge and dedication to good service, they can install your garage door springs quickly, safely, and with zero trouble.